A: Most of the other equipment on the market that is being presented as gypsum processing equipment is lacking in technology. These systems are usually designed for other applications and are being modified to process a gypsum slurry. They typically work for the first few batches, then it becomes a high maintenance and troublesome piece of equipment. RimCraft researched the environments that the Gypsum Spray Systems had to operate in when we started to design our system. The system would be in water prone areas at all times, must require little to no maintenance and  flush quickly and easily with no disassembly of components. All components must be laid out for easy inspection and access. The system must be USER FRIENDLY! With all of this in mind, RimCraft set out to engineer a TRUE GYPSUM PROCESSING SYSTEM!

• RimCraft tested several pumps before chosen the current models, 1/2" and 1 1/4" peristaltic hose pumps.
• The entire system can be flushed with less than 8 gallons of water and in less than 10 minutes.
• The RimCraft Gypsum Spray Gun is modular in design. The spray nozzle is CNC Machined from Stainless Steel to provide long life. Competitor's are typically machined from a soft aluminum material.
• The pneumatic components are protected from the elements by a fiberglass control box enclosure.
• All fittings, clamps, fluid passageways are engineered and manufactured from Stainless Steel and certain plastics for corrosion resistance.
• The Accelerator Injection System is engineered to provide a accurate delivery of the hardener.
• The system can be plugged into any standard 15 AMP 120 Volt AC wall outlet. For worker safety, RimCraft Gypsum System are equipped with a Ground Fault Circuit Interrupter (GFCI) Plug.