top of page

GFRC Spray Equipment Systems

We have made our GFRC Spray Equipment Systems with the best of equipment and innovation to allow for smooth operation, easy cleanup and maintenance, reduction in labor and materials cost, and consistently superior results.

RimCraft RimSpray Mini Sprayer

RimSpray MiniSprayer for GFRC

​RimCraft's RimSpray Mini Spraying Machine is ideal for getting an even coat in any mold or form, including complex architectural facades. Concrete can be "painted" into even the tightest corners with our specialty nozzles, and clean-up can be completed in minutes

​

Features

  • Ultra Portable GFRC Sprayer

  • 32 MM RimSpray Peristaltic Pump for E-Z Clean-Out and Ability to Spray Fiber and Aggregate Slurries

  •  Quick Knockdown pump for Super-EZ (5 minute) Hose change. No drive train disassembly required

  •  NEMA 4X Electric Control Box with Variable Speed AC Motor Drive

  •  2 HP 208/230 VAC 3 Phase Motor Direct Gear Drive with Forward and Reverse

  •  20 CFM @ 90 PSI Air, Fresh Water (garden hose hook-up) and 208/230 VAC 3 Phase 20 Amp Circuit Required (Other Voltages and Single Phase Available)

  •  30 ft. Power Cord (Specify Plug)

  •  Fresh Water Purge for Spray Gun Air Passages with Washdown Hose Included

  •  Removable 15 Gallon Stainless Steel Material Hopper for Easy Clean-Out

  •  E-Z Clean Slurry Passages with 3 Clean-Out Pigs (sponges) Included.

  •  Premix Gun Included with extra Face Coat Nozzle

Minimum System Requirements: Garden Hose Connection; Power; 3 Phase 208-230V; 1 Phase 220V; Other Voltages Available; Air Compressor; Minimum CFM 20 at 90 PSI

​

See It In Action

RimCraft Max C2 Sprayer

RimCraft MAX2 GFRC Sprayer with !0 Foot Boom

RimCraft's Max C Spray System is a full size machine for High Output GFRC spray-up operations.

It is available with a 2 or 3 section extended reach boom with a 10 Ft to an 18 Ft radius.

The 3 piece boom (max C3) unit is built on a larger, more stable base for the extra length.

This unit is designed for use with either Premix or Chopped Fiber spray

With no-flat 14” tires in the rear and large Urethane covered casters in the front, this unit can easily traverse rough factory floors.

 

Features

  • Highly Maneuverable GFRC Sprayer with Long Overhead Reach for use on Large Molds

  • 32 MM RimSpray Peristaltic Pump for E-Z Clean-Out and Ability to Spray Fiber and Aggregate Slurries

  • Quick Knockdown pump for Super-EZ (5 minute) Hose change. No drive train disassembly required

  • Water-Tite Control Box with Variable Speed AC Motor Drive

  • 2 HP 208/230 VAC 3 Phase Motor Direct Gear Drive with Forward and Reverse is Standard. Other Voltages and Phases are Available

  • 20 CFM @ 90 PSI Air, Fresh Water (garden hose hook-up) and 208/230 VAC 3 Phase 20 Amp Circuit Required (Other Voltages and Single Phase Available)

  • 30 ft. Power Cord (Specify Plug)

  • Fresh Water Purge for Spray Gun Air Passages with Washdown Hose Included

  • Removable 15 Gallon Stainless Steel Material Hopper for Easy Clean-Out

  • E-Z Clean Slurry Passages with 3 Clean-Out Pigs (sponges) Included.

  • PSHV-45 Premix Gun Included standard along with a Wand Style GSFC-45 Face Coat Nozzle

  • Available Titan Fine Spray pistol style face coat gun

  • Provisions in place to add Concentric Gun

  • Available RimCraft Concentric Chopper Gun Kit

Minimum System Requirements:Garden Hose Connection; Power; 3 Phase 208-230V; 1 Phase 220V; Other Voltages Available; Air Compressor; Minimum CFM 20 at 90 PSI​

​

See It In Action

RimCraft BakHopper

RimCraft BackHopper Sprayer

​Our BakHopper is an affordable option to our GFRC Spray Machines for the small shop and DIY Decorative Concrete Manufacturers and Artisans.

Typically, you would be using hand-coating processes that are both time and material consuming, with varying results.

​

With the BakHopper, you will be able to do in minutes what took you hours to do, thereby increasing productivity and saving on labor costs. In addition, rather than hand-packing large quantities of material into sharp edges, you will be able to spray a more consistent coat to the corners and verticals, saving you on materials cost. The cleanup is remarkably simple.

​

Features

  • For spraying premix GFRC.

  • Advanced design ergonomic handle to access low and tight places

  • Excellent for small vertical applications as our design allows you to run thicker mixes for the perfect cover

  • Simple air-actuated trigger

  • Easy clean-up due to our sweeping curve construction

  • Exclusive Venturi with removable nozzle for consistent draw of material minimizing plugging

  • Fits a standard 2” hopper

  • ​

​

See It In Action

TAKE A CLOSER LOOK

bottom of page