GFRC Spray Machines
Engineered for reliable, consistent output and fast cleanup. From small artisan shops to high-volume precast operations there's a RimCraft sprayer for your production.
RIMESPARY MINI SPRAYER
RIMCRAFT MAX C2 SPRAYER
RimSpray Mini Sprayer
Ultra-portable. Production-ready.
Ideal for getting an even coat in any mold or form, including complex architectural facades. Concrete can be "painted" into even the tightest corners with our specialty nozzles, and clean-up can be completed in minutes.
Key Specifications
-
Ultra Portable GFRC Sprayer
-
32MM RimSpray Peristaltic Pump for E-Z Clean-Out and ability to spray fiber and aggregate slurries
-
Quick Knockdown pump for Super-EZ (5 minute) hose change — no drive train disassembly required
-
NEMA 4X Electric Box with Variable Speed AC Motor Drive
-
2 HP 208/230 VAC 3 Phase Motor Direct Gear Drive with Forward and Reverse
-
20 CFM @ 90 PSI Air; Fresh Water purge for Spray Gun Air Passages with Washdown Hose Included
-
Removable 15 Gallon Stainless Steel Material Hopper for Easy Clean-Out
-
E-Z Clean Slurry Passages with 3 Clean-Out Pigs (sponges) included
-
Premix Gun Included with extra Face Coat Nozzle
Minimum System Requirements
Garden Hose Connection; Power: 3 Phase 208-230V; 1 Phase 220V; Other Voltages Available; Air Compressor: Minimum CFM 20 at 90 PSI
RimCraft Max C2 Sprayer
Full-size machine for high-output operations.
The Max C2 system is a full size machine for High Output GFRC spray-up operations. It is built with a 5-foot extended reach — approximately 10 ft on a 5ft radius. The 5 piece boom/mast C2 unit is built on a larger, more stable base for extra length. This system is designed for use with either Premix or Chopped Fiber spray. With radial 14" tires in the rear and large urethane covered casters in the front, this unit can easily traverse rough factory floors.
Key Specifications
-
Highly Maneuverable GFRC Sprayer with Long Overhead Shield for use on Large Molds
-
C2 MM RimSpray Peristaltic Pump for E-Z Clean-Out; ability to spray fiber and aggregate slurries
-
Quick Knockdown pump for Super-EZ (5 minute) hose change — no drive train disassembly required
-
2 HP 208/230 VAC 3 Phase Motor Direct Gear Drive with Forward and Reverse; Standard: Other Voltages and Phases Available
-
Fresh Water Purge for Spray Gun Air Passages with Washdown Hose Included
-
PTFE (2 Piston) Gun Included; combination long ratio Wivel type 206 2:1 Gun Dad Nut Kit
-
Fresh Water Purge from pump inlet for Easy Hose Clean-Out
-
Available Manifold: Conversion Chopper Gun Kit
Minimum System Requirements
Garden Hose Connection; Power: 1 Phase 208-230V; 1 Phase 110V; Other Voltages Available; Air Compressor: Minimum CFM 20 at 90 PSI
Call us at 844-746-2723 we'll help you match the machine to your operation and budget.